Electronic Signature Audit Trail: What It Records and Why

An electronic signature audit trail is the time-ordered record of what happened while a document was signed: who was asked, who opened it, who agreed and signed, and when. The signature on the page only shows a name. The audit trail is what you pull out if someone later says they never signed, or that the document was different. If you send a contract only now and then, you want that record produced automatically and delivered with the signed PDF. With PayPerSign you upload a PDF, add the signers and pay US$5.99 per document (€5.99 in Europe, tax included) when you send. Everyone receives the signed PDF with an Evidence Certificate. No account and no subscription are required.
Key Takeaways
- An audit trail is a chronological log of the signing process. It gives context that a typed or drawn signature cannot give on its own.
- The Evidence Certificate that comes with your signed PDF is the readable summary of that record: who signed, when, and the consent each signer gave.
- An audit trail supports your case. It does not replace identity checks, and validity still depends on the country and the type of document.
- Download the signed PDF and the certificate together and keep them in your own files, because PayPerSign does not offer long-term document storage.
- PayPerSign costs US$5.99 per document for up to 2 signers, plus US$0.99 for each additional signer, up to 10 signers.
Table of Contents
- What an electronic signature audit trail is
- Why the record matters as evidence
- What PayPerSign records
- What an audit trail can and cannot show
- Where the audit trail stops mattering: documents that need more
- How to read the Evidence Certificate on a signed PDF
- What to look for in any e-signature audit trail
- Practical examples
- Sending a document with PayPerSign
- Pay per document, with the record included
- FAQ
- Sources
What an electronic signature audit trail is
Picture a paper contract signed at a kitchen table. Two people watched it happen, and the pen marks are the proof. Online, nobody watches. A typed name or a drawn squiggle is easy to produce, so the proof has to come from a record kept while the signing took place.
That record is the audit trail, sometimes called an audit log. One glossary definition describes it as a chronological record of the events and data captured during signing: what happened to the agreement, when each event occurred and which participants were involved. A signature image cannot tell you any of that.
Two words get mixed up, so here is the difference:
- Audit trail: the underlying log of events, step by step.
- Certificate (audit certificate, certificate of completion, evidence certificate): the document that summarizes that log in a form you can read and file. One commentator likens the certificate to a receipt and the trail to security camera footage, as summarized here.
When people search for a signed PDF with an audit certificate, they usually mean the second item: a page or file attached to the signed contract. In PayPerSign this is the Evidence Certificate.
One point of clarity: a document signed in pen and then scanned is not an electronic signature. It is a traditional signed document in PDF form, as the Law Society of Scotland’s guidance puts it. An audit trail exists only when the signing itself happened electronically.
Why the record matters as evidence
Under US law, a signature or contract may not be denied legal effect solely because it is electronic. That rule sits in the ESIGN Act at the federal level, and in the Uniform Electronic Transactions Act (UETA), the model law that states have adopted. The same principle appears in the EU’s eIDAS Regulation and, for the UK, in the Electronic Communications Act 2000, which makes electronic signatures admissible as evidence.
Admissible is not the same as proven. If a signature is challenged, the question becomes: who did it, and did they mean it? UETA addresses this directly. An electronic signature is attributed to a person if it was that person’s act, and this may be shown in any manner, including by showing how a security procedure worked. An audit trail is the kind of material that fits that description. It shows a sequence: the invitation went out, the signer opened it, agreed to sign electronically, and signed.
A useful audit trail helps answer four questions:
- Who was asked to sign, and who signed.
- When each step happened.
- What they agreed to: the consent to sign electronically and the intent to sign that exact version of the document.
- How the process unfolded, in what order.
That is the practical value for a freelancer, a landlord or a tradesperson. You will probably never need it. If you do, a dated, step-by-step record is far stronger than an email saying “attached, signed”.
What PayPerSign records
PayPerSign keeps the signing record described below and puts it in the Evidence Certificate that every party receives with the signed PDF.
- Who signed. Each signer opens a secure email link and signs with a typed or drawn signature.
- When they signed. The certificate details the signing activity with its timing.
- The consent each signer gave. Every signer must actively consent to signing electronically.
- Intent to sign that exact version. Each signer confirms they mean to sign the specific version of the document they were shown.
- Every step in an audit trail. The process from sending to completion is recorded.
PayPerSign provides simple electronic signatures. It does not verify identity, and it does not offer qualified electronic signatures, notarization or witnessing. That is the right frame for the certificate: it documents the signing activity and consent. It does not certify who a person is in the real world.
What an audit trail can and cannot show
A fair reading of the evidence keeps you from over- or under-trusting the record.
It shows the sequence. Events happened in a given order, at given times. Each event is normally paired with a timestamp, and a well-built record is clear about the time zone or uses a standard such as UTC, as the glossary explains.
It shows access through the invitation. A signature made from an emailed link shows that someone used the link sent to that address. The same glossary notes that this does not by itself prove the named person acted personally. That is why, for a simple electronic signature, the email address you enter for each signer matters. Use the address that person actually reads, and confirm it with them before you send.
It does not prove every page was read. A record that a document was displayed is not a record of understanding. The consent step is there so the agreement does not rest on silence.
It is strong, not magic. The Law Society of Scotland’s guidance says a simple e-signature applied through an e-signing platform, together with its audit trail, can often provide an adequate level of certainty, while advanced and qualified signatures offer more assurance about identity. For an ordinary freelance agreement or a quote approval, that is the realistic standard. For a high-value, disputed or unusual document, speak to a qualified lawyer in your jurisdiction before you choose how to sign.

Where the audit trail stops mattering: documents that need more
An audit trail cannot turn a document into something the law does not allow to be signed this way. Validity depends on the country and the type of document. Electronic signatures are recognized for many ordinary agreements under US ESIGN and UETA, the EU’s eIDAS and the UK Electronic Communications Act 2000, but certain documents sit outside simple electronic signing:
- Documents that require a notary.
- Documents that require witnesses.
- Deeds and documents that require registration.
- Wills.
- Family-law matters.
PayPerSign is not for those. Do not use any simple e-signature tool for them, and ask a lawyer if you are unsure which side your document falls on.
Rental agreements deserve a specific note, because landlords often ask. Rules for tenancies vary by country and by state. In England, a tenancy longer than three years must be made by deed, so it cannot be handled as a simple electronic signature. A short residential agreement for a room or a flat is a different matter, but check the rules where the property is.
How to read the Evidence Certificate on a signed PDF
When the last signer finishes, you receive the signed PDF and the certificate. Here is a short routine to follow with it.
- Match the names and email addresses. Confirm the signers listed are the people you meant, with the addresses you entered.
- Check the sequence and dates. The order of events should make sense: sent, then signed, then completed. Look for the date and time on each signer’s entry.
- Look for the consent. Each signer’s electronic-signing consent and confirmation of intent should be recorded.
- Confirm the document is the one you sent. Open the signed PDF and check that the version and content are what everyone agreed.
- Save both files together. Put the signed PDF and the certificate in the same folder, with a clear name such as the client, the document type and the date.
Step five matters more than it seems. PayPerSign processes files temporarily and deletes them after a short download window, and it has no long-term document storage. Download your copies when the document completes. If you ever need to rely on the record, you want the signed PDF and certificate in your own files, kept for as long as the agreement matters. If a law requires you to keep a record, UETA requires that the retained electronic record accurately reflect the information and remain accessible for later reference.
What to look for in any e-signature audit trail
Whatever tool you use, a record is only useful if it holds up when read cold, months later. Use this list when you judge one:
| What to look for | Why it matters |
|---|---|
| Names and email addresses of every signer | Ties each signature to an invited person |
| Time of each step, with time zone | Fixes the order of events |
| Evidence of consent to sign electronically | Shows the signer agreed to the method |
| Confirmation of intent to sign that version | Links the signature to the document as it stood |
| A signed PDF delivered together with the record | Keeps the proof and the agreement as a pair |
| Honest statement of what is not checked | Tells you how much weight to put on it |
Some public-sector standards ask for much more. Virginia’s e-signature standard, for example, requires services used by state agencies to capture items such as authentication method and signing location. That is a specification for government systems. A one-off freelance contract has different needs, and a simple electronic signature with a clear record of signing and consent suits ordinary agreements.
Practical examples
A freelance designer sending a project agreement. You upload the PDF, add the client as the signer and send. The client opens the email link, consents, signs, and you both get the signed PDF with the certificate. If the client later says the scope was different, you have the exact signed version and the record of when it was signed.

A photographer with a model or client release. The client signs from a phone or laptop through the email link. You file the PDF and certificate with the shoot’s folder. Avoid using it for anything involving minors or medical consent.
A tradesperson getting a quote approved. Send the quote as a PDF. The customer signs to approve the price and scope, and the certificate shows when they approved it, which settles most “I never agreed to that” conversations.
A landlord renting a room. For a short residential agreement, you and the tenant sign by email link. Check your state’s or country’s rules first, and remember that in England a tenancy longer than three years must be a deed.
A consultant sending a proposal and an NDA. Add the client and a colleague of theirs as signers. Two signers are included in the price, and each additional signer is US$0.99 (€0.99), up to 10 signers on one document.
Sending a document with PayPerSign
The process is short, and the audit trail builds itself along the way:
- Upload your PDF. Make sure it is final. Signers confirm intent to sign that exact version, so fix typos before you send.
- Add the signers. Enter each name and the email address that person actually uses.
- Review everything. Check the document, the signers and the details.
- Pay when you send. The price is US$5.99 per document (€5.99 in Europe), tax included, for up to 2 signers.
- Signers sign from their email link. They consent and sign with a typed or drawn signature.
- Download the signed PDF and the Evidence Certificate. Everyone receives both. Save them straight away.
For a deeper checklist before you send, see our guide to secure document signing.
Pay per document, with the record included
If you pay for an e-signature subscription you open twice a year, the audit trail is not the thing you are paying extra for. It is part of every completed signing. PayPerSign is a pay-per-document e-signature tool: you upload a PDF, add signers and pay US$5.99 per document when you send. There is no account to create and no subscription to keep.
The price includes up to 2 signers. Each additional signer is US$0.99 (€0.99), with a maximum of 10 signers per document. The signed PDF and the Evidence Certificate go to everyone involved. You can send your first document at PayPerSign.
FAQ
What is the difference between an audit trail and an audit certificate?
The audit trail is the full log of events during signing. The certificate is the readable summary of that log, delivered with the signed PDF. In PayPerSign it is called the Evidence Certificate and shows who signed, when, and the consent each signer gave.
Does an audit trail make an e-signature hold up in court?
It helps, but it does not guarantee an outcome. US law says a signature cannot be denied effect solely because it is electronic, and attribution to a person can be shown in any manner. Validity still depends on the country and the document type, so ask a qualified lawyer in your jurisdiction about high-value, disputed or unusual documents.
Does PayPerSign verify who the signer is?
No. PayPerSign provides simple electronic signatures. Signers use a secure email link and actively consent, and the record documents that activity. It does not include identity verification, notarization or witnessing.
How long can I download the signed PDF and certificate?
PayPerSign processes files temporarily and deletes them after a short download window. It does not offer long-term document storage, so download the signed PDF and the Evidence Certificate as soon as the document is complete and keep them in your own files.
Sources
- Electronic Signature Audit Trail, BrandJet Glossary
- Electronic Signatures, Law Society of Scotland, third edition
- 15 U.S. Code § 7001, general rule of validity (ESIGN)
- Uniform Electronic Transactions Act (1999)
- Regulation (EU) No 910/2014 (eIDAS)
- Electronic Communications Act 2000, section 7
- Law of Property Act 1925, section 54
- Commonwealth of Virginia, Computer-Based Signatures standard
